Recent Press

The following list summarizes the News Releases issued by Brookfield. The detailed text of each News Release is then presented in the same order in which the News Releases appear. For further information on News Releases and Feature Articles, contact the Marketing Communications Department at Brookfield.

August 2008:
New TexturePro CT Software from Brookfield, Powerful and Easy-to-Use!

June 2008:
The DV-II+Pro Viscometer has a Fresh New Look!

June 2008:
New Powerful CT3 Texture Analyzer Features Both Compression and Tension!

May 2008:
New Rheo3000 Software Features a New Contemporary Look and 21 CFR Compliance

April 2008:
New Rheo3000 Software Features a New Contemporary Look and 21 CFR Compliance

April 2008:
New "Peel & Stick" Protective Covers Keep Your Keypad Clean As A Whistle!

February 2008:
Brookfield R/S Plus Rheometer has a new look…delivering form and function!

January 2008:
Brookfield Sales Engineer David Moonay, Ph.D., awarded U.S. Patent

January 2008:
Brookfield Names Chiang Senior Sales Engineer

January 2008:
Brookfield Names Hebert Senior Sales Engineer

November 2007:
On-Site Service Proves to Be Valuable Resource for Brookfield Customers

October 2007:
On-Site Service Proves to Be Valuable Resource for Brookfield Customers

July 2007:
New Texture Pro Lite Software from Brookfield…Now Quicker, Faster, and Better!

June 2007:
Simple, Economical Viscosity Control for Printing Applications including Coatings, and Adhesives

August 2008
New TexturePro CT Software from Brookfield, Powerful and Easy-to-Use!
Middleboro, MA - Brookfield Engineering Laboratories introduces TexturePro CT Software for the food, cosmetics and pharmaceutical industries. It is designed specifically for use with Brookfield's new CT3 Texture Analyzer which connects directly to any USB port on your computer.

The new TexturePro CT v1.0 is powerful, yet simple to learn and easy-to-use. TexturePro CT allows users to collect data and perform detailed data analysis on test samples of various shapes and sizes with real time graphic plotting during the test. Custom reports and graphs are easily created right from the menu screen.

The sample identification set-up screen helps new operators quickly get started with test fields that outline a variety of parameters. The software features advanced data analysis with built-in parameter calculations such as springiness, chewiness, hardness and much more, helping new users select the best data analysis for their specific test.

New TexturePro CT also has an optional Secure Mode, which enables the operator to run new test methods, collecting and saving the data, while protecting existing test methods and data against change or deletion.

TexturePro CT can evaluate the mean and standard deviation of each test result parameter for up to 30 samples. The data and statistical analysis is then saved in true database file storage structure, minimizing space requirements and allowing for easy, logical file naming conventions. Data is easily exported to other computers or into Microsoft Excel format. The operator can also configure their own customized display.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

June 2008
The DV-II+Pro Viscometer has a Fresh New Look!
Middleboro, MA - Brookfield Engineering introduces the newly redesigned DV-II+Pro Viscometer. The shape, color scheme and keypad layout have all been updated with a contemporary new look.

The DV-II+Pro is Brookfield Engineering's most popular and versatile viscometer providing continuous viscosity sensing, temperature measurement and data display. The DV-II+Pro features bi-directional communication when used with a dedicated computer. Utilizing Brookfield Rheocalc32 software, the instrument can be totally controlled by the computer. This dynamic capability positions the DV-II+Pro Viscometer as the best value on the market.

The DV-II+Pro offers simplicity of operation for single point viscosity measurement or it can be configured to run automated tests in standalone mode for comprehensive flow curve characterization without the involvement of the operator or computer. When using Brookfield's Rheocalc32 software, advanced data collection and analysis methods are possible with all instrument functions being controlled through the computer.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

June 2008
New Powerful CT3 Texture Analyzer Features Both Compression and Tension!
Middleboro, MA - Brookfield Engineering introduces the New CT3 Texture Analyzer, the most powerful, lowest cost, stand-alone Texture Analyzer ever produced. This new generation instrument features not only the traditional Compression Mode, but now includes a brand new Tension Mode. Now manufacturers can test their products and the packaging as well. The large vertical work area of the CT3 is ideal for large sample placement. This also allows for increased travel distance maximizing the functionality of the new Tension Mode.

The CT3 offers load cells in 100g, 1,000g, 1,500g, 4,500g and 10kg. The 10kg load limit more than doubles the limit of it's predecessor, the LFRA Texture Analyzer. It also features a broader speed range for probe movement, a USB port for direct connection to a PC, and an optional temperature probe.

The CT3 Texture Analyzer features seven test modes. These Report Test Modes include: Normal Test, Hold Time Test, Cycle Count Test, Bloom Test, TPA Test, Tension Test and Static Load Calibrator Check.

Brookfield provides a complete line of fixtures for use with the CT3. In addition, Brookfield will work with customers to develop custom equipment for their specific texture measurement applications.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

May 2008
New Rheo3000 Software Features a New Contemporary Look and 21 CFR Compliance
Middleboro, MA - Brookfield Engineering hosts ViscosityJournal.com, a free informational website and resource dedicated to professionals in the viscosity and texture analysis marketplace. Live presentations with industry leaders and educators is one of the most valuable resources on ViscosityJournal.com. Members log in to listen and participate in these interviews with topics ranging from general discussions on the science of viscosity control to specific industry related subjects.

ViscosityJournal.com members receive e-mail notices providing information on upcoming live events. These exclusive interviews and discussions are available in the "Viscosity Forum" for download and playback at any time to all ViscosityJournal members.

In addition to the "Viscosity Forum," the website has an area for members to ask questions about their specific viscosity challenges. The answers are then posted in the "Q&A" section so all can benefit. ViscosityJournal.com also features many "Industry Articles," "Press Releases," valuable links for Products, Industry Resources, Viscosity Solutions and Articles & Reprints.

Brookfield also sponsors a number of industry specific websites including: asphaltviscosity.com, foodviscosity.com and inkviscosity.com. These sites are valuable resources targeted toward the needs of today's professionals.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

April 2008
New Rheo3000 Software Features a New Contemporary Look and 21 CFR Compliance
Middleboro, MA - Brookfield Engineering introduces Rheo3000 Software for use with their R/S Rheometers. This new software features an updated fresh appearance and 21 CFR Compliance.

Title 21 CFR (Code of Federal Regulations) is the U.S. Food and Drug Administration's strategic initiative to modernize the regulation and control of electronic records and electronic signatures. The goal is to maintain the integrity of test data.

New Rheo3000 software lets your PC do the data collection and analysis work for you. Simply program shear stress or shear rate, temperature and test time requirements!

Rheo3000 Software provides visual information and test data on viscoelastic behavior such as viscous creep and recovery. Quality Control Mode enables tolerance bands to be placed around measurement data for immediate visual pass/fail determination. Mathematical data processing models included: Newton, Bingham, Casson, Herschel-Bulkley, Ostwald and Steiger-Ory.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

April 2008
New "Peel & Stick" Protective Covers Keep Your Keypad Clean As A Whistle!
Middleboro, MA - Brookfield Engineering introduces protective Keypad Covers for many Brookfield instruments.

These clear covers protect keypads against dirt, scratches, spillage and dust. They are ideal for instruments with multiple users and for busy, high traffic work areas. The new "peel and stick" design allows for easy, rapid application. These flexible protective covers are packaged in quantities of 10.

Protective Keypad Covers are available for DV-I series, DV-II series, CAP series, DV-III series, YR-1, VTE series and AST-300SY touch screen controller models.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

February 2008
Brookfield R/S Plus Rheometer has a new look…delivering form and function!
Middleboro, MA - Brookfield Engineering introduces the New R/S Plus Rheometer, complete with all the features Brookfield customers are familiar with, plus a brand new look. In addition to the modern styling of the instrument, the new R/S Plus features a smaller diameter spindle shaft, smaller size water jacket accessory and direct control of temperature from the keypad on P1 and P2 Cone Plate models.

The R/S Plus is designed for rheological evaluation of materials through the direct measurement of viscosity, yield stress, thixotropic response, creep and other flow properties. It features a temperature range up to 180C, speed range from 0.1 to 1,000 rpm, and measurement sensitivity delivering comprehensive data for modulus and static yield stress as well as information for creep testing.

The R/S Plus operates in both stand-alone mode as well as under PC control. The new R/S Plus running under Brookfield's Rheo3000 software provides powerful flow characterization tools including shear ramp, loop and single point testing.

The R/S Plus is available with cone/plate, plate/plate, or coaxial cylinder measurement geometries. It's engineered to meet the demands of quality control labs and to provide sophisticated flexibility for research environments as well as simple operation on the production floor.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

January 2008
Brookfield Sales Engineer David Moonay, Ph.D., awarded U.S. Patent
Middleboro, MA - Brookfield Sales Engineer and Rheology Lab Supervisor, David Moonay, Ph.D., has been awarded a U.S. patent for an algorithm he developed that provides "multi-decade viscometric or rheologic measurements of a material undergoing state change." According to Dr. Moonay, "This algorithm allows us to use Brookfield instruments to collect data on products that gel or cure over a much wider range of viscosity than ever before." Unfortunately, in the past, the only option for customers was to spend between $30,000 and $50,000 for a high-end rheometer.

Dr. Moonay developed this solution after talking with customers who complained that their gel timers couldn't get the viscosity data they needed. Now, Brookfield customers can monitor gelling over a wide viscosity range at a reasonable price. The "Cure Mode Test" is included in Brookfield Rheocalc Software (Version 3.0 and above), and can run on DV-II+Pro Viscometers, DV-III+ and DV-III Ultra Rheometers.

The Cure Mode Test is ideal for adhesives, advanced composites, polymers, and has possible applications in other food, chemical and petroleum products.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

Brookfield Names Chiang Senior Sales Engineer
Middleboro, MA - Brookfield Engineering Laboratories is pleased to announce the appointment of Eric Chiang to the position of Senior Sales Engineer. Continuing expansion in Brookfield's worldwide business for viscosity measurement/control and texture analysis has necessitated this addition to staff at the U.S. headquarters. Eric's multilingual capability (Chinese, Malay, etc.) will be helpful to Brookfield's growing customer base in Asia.

Eric provides Brookfield customers with sales assistance and technical support for both the domestic and international markets. He also serves on the Brookfield Training team, teaching the Practical Course On Viscosity Measurements and the Applied Course On Viscosity Test Methods. These practical, hands-on courses are offered at Brookfield's facility in Middleboro, MA, and at major metropolitan areas across the U.S.A.

Most recently Eric held positions with Hexagon Holdings Berhad in Malaysia and Yokogawa Electric Corp. He has extensive experience in project engineering and instrumentation. Eric has been involved in the design/build of plants including both the installation & commission and maintenance & repair cycles.

Eric received an undergraduate degree in Electrical Engineering at the University of the District of Columbia and then completed his MBA at the University of Newcastle in Australia.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

Brookfield Names Hebert Senior Sales Engineer
Middleboro, MA - Brookfield Engineering Laboratories is pleased to announce the appointment of Vincent Hebert to the position of Senior Sales Engineer. Vincent is a graduate of Roger Williams University with a degree in Electrical Engineering.

Vinny has been in the industry for more than 25 years with extensive experience in product testing, marketing, technical support and sales. He will provide Brookfield customers with product recommendations and sales assistance, technical support and training.

Vinny is also managing Brookfield's in-house and regional Educational Programs. Since coming on board, he has enhanced both the Practical Course On Viscosity Measurements and the Applied Course On Viscosity Test Methods. These practical, hands-on courses are offered at Brookfield's facility in Middleboro, MA., and at major metropolitan areas across the U.S.A.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

November 2007
New 2008 Catalog from Brookfield
Middleboro, MA - Brookfield Engineering Laboratories announces the release of their new 2008 full-color catalog, featuring their complete line of Viscometers/Rheometers and Texture Analyzers.

Middleboro, MA - Brookfield Engineering Laboratories announces the release of their new 2008 full-color catalog, featuring their complete line of Viscometers/Rheometers and Texture Analyzers.
AST-100 Process Viscosity Controller Designs - The popular AST-100 in-line viscosity control system now has new flange mount and probe type designs. These instruments have no moving parts and do not require recalibration.

• DV-I Prime Viscometer - Exciting new features include "Timed Option" and "Print" buttons. Optional WINGATHER software allows use of a PC to collect, analyze and record viscosity test data. Continuous torque sensing and data display easily make the DV-I Prime Viscometer one of the best values in the market!
• Quick Action Lab Stand - Simply push a button for quick positioning of the viscometer head and faster testing. Perfect for environments with heavy workloads, multiple users and varied testing situations.
• EZ-Lock Spindle Coupling System - Safely attach spindles quickly and efficiently with this innovative, spring-loaded spindle coupling design.
• New Protective Keypad Covers - Protect keypads against dirt, scratches, spillage and dust with our new "peel and stick" flexible covers.

For more information, please contact marketing@brookfieldengineering.com or call 800.628.8139 (USA and Canada) or 508.946.6200.

October 2007
On-Site Service Proves to Be Valuable Resource for Brookfield Customers
Middleboro, MA - Brookfield Engineering Laboratories' on-site service engineers have proven to be a valuable resource for many Brookfield customers. Throughout the past year, customer requests for on-site service have continued to increase at a rapid pace.

Brookfield customers request on-site service because they can't afford to stop production while their instruments are at Brookfield for repair. On-site service technicians go directly to the customer's facility and put their instruments in top running order without a major interruption in production schedules. In addition to performing all necessary repairs and adjustments, Brookfield technicians often provide valuable tips and techniques for taking good viscosity measurements.

For customers that don't require on-site service, the skilled service team at Brookfield can get the job done, repairing and calibrating thousands of instruments per year.

For additional information about Brookfield on-site or in-house service, please contact marketing@brookfieldengineering.com.

July 2007
New Texture Pro Lite Software from Brookfield…Now Quicker, Faster, and Better!
Middleboro, MA - Brookfield Engineering Laboratories has introduced a new version of TexturePro Lite Software for the Brookfield LFRA Texture Analyzer. TexturePro Lite software simplifies repetitive sample testing and provides immediate texture profiles for comparison and analysis.

This new version of TexturePro Lite includes enhanced data acquisition options providing much faster test times. Once test parameters are selected, the click of a mouse starts the test cycle; when the test is complete, you can save, plot, compare and print test data.

Additional new features of TexturePro Lite include: a results table with filename information for easy data identification, an enhanced tutorial providing a guide to test methodology, menu shortcut buttons that appear on the data graphs and the ability to precisely position cursors on data graphs.

TexturePro Lite is a handy tool for use in both QC and R&D labs. The Brookfield LFRA Texture Analyzer is ideal for food products, adhesives, personal care products, pharmaceuticals and more.

Many texture parameters are available for automatic calculation and flexible user-defined calculations may be added. Instrument control, data analysis and graphics are embedded in this powerful, easy-to-use program.

To learn more about New TexturePro Lite software, please contact marketing@brookfieldengineering.com.

June 2007
Simple, Economical Viscosity Control for Printing Applications including Coatings, and Adhesives
Middleboro, MA - Brookfield Engineering, the world leader in viscosity measurement offers simple in-line viscosity control for industrial applications. The AST-100 is available with single and multi station controllers for applications including printing ink, coatings and adhesives.

The AST-300SY single station viscosity controller is designed for use with the Brookfield AST-100TSY system to control viscosity and temperature, interlock with other process devices, and accurately control fluid viscosity in a variety of applications.

The AST-300SY is a precise, programmable controller with timed closing intervals. Its intuitive screen layout allows for quick selection of setup and menu items. At a glance, set point and alarm status are displayed as are viscosity in cP, mPa.s, cSt or cup-seconds, and temperature in C or F. Additional features include:

• Viscosity trending
• Feed pump interlock
• Multi-level password protection
• Viscosity high/low alarms

The NEW AST-400SY multi-station controller exhibits the same features with the ability to control up to 10 units.

Both controllers work with the AST-100TSY viscosity sensor to provide consistent viscosity control for your process needs. Whether you are using inks, coatings or adhesives, the AST-100 can help maintain the quality of your product to meet your customer’s needs.

It’s a matter of maintaining optimum coverage

A problem with ink film that’s too light is easily seen; but ink film that’s too heavy cannot be detected by the eye. Once mass-tone is achieved, ink film does not change as it becomes thicker. To the unaided eye the top of a .001" thick film will appear little different from a film of the same ink .0001" thick. Without sophisticated viscosity control it’s possible to waste a lot of expensive ink. The same is true of other coatings and adhesives as well.

Brookfield's AST-100 Automatic Viscosity Control maintains ink/coating/adhesive thickness at correct levels throughout the run.

This is an automatic control system that continuously senses viscosity, transmitting a signal when additional solvent is required, thus preventing wasteful material buildup.

Sensitive control is the key

Control of the slightest change in viscosity makes all the difference to successfully applying material - particularly in the low viscosity region of the thin inks currently in use. The Brookfield Ast-100 has a simple, rugged design that allows it to maintain accurate control at low viscosities. With an economical price, no moving parts, and no calibration required, other viscosity control systems can’t match it.

For more information on the sanitary AST-100 with single station or multi-station control, go to www.inkviscosity.com or contact Moses Mendez at 800.628.8139.